MegaBlock Machine Plaster Mortar

Megablock Plaster mortar, which is a cement-based ready-to-use rough plaster that can be applied by hand, can be used on ceilings and surfaces indoors and outdoors.

  • The container in which the mortar will be prepared must be clean and clear of the remnants of the previous mixture.
  • Attention should be paid to the cleanliness of the water and materials used.
  • The mortar should be prepared at the rate of 35 kg Megablock Machine Plaster Mortar in 8.5-9 liters of water.
  • Aluminum anos are placed on the surface to determine the thickness of the plaster before the application.
  • The surface to be applied must be wetted just before the application. Megablock Machine Plaster Mortar should be sprayed on the application sur- face in horizontal stripes, leaving no gaps on the application surface at the same density.
  • The application thickness should be at least 8 mm and a maximum of 10 mm on the ceiling for one layer and 10-20mm on other facades. If the second layer is required, it should be applied without taking the first-floor socket. It should not be applied more than one layer on ceiling sur- faces and two layers on other surfaces. After 5-10 minutes, gauging is done.
  • When the plaster does not move when touched with a finger, it is correct- ed with a trowel.
  • Approximately 30 minutes after the correction process, the surface is slightly wetted, sponge trifoliate is made and the process is finished.
  • In terms of the strength of the plaster, the surfaces should be watered within 7 days after the application, depending on the ambient conditions.
  • The prepared mortar must be consumed within 2 hours.
  • Hands and application tools should be washed with plenty of water after application.
  • Approximately 10-12 kg / m2 (for 10 mm thickness)
Dry Bulk Density: 1500± 300kg/m3
Thermal Conductivity: Çizelge 2 T1 ≤ 0,57 W/mK (P=%90)
Compressive Strength: CS IV ( ≥ 6 N/mm²)
Bond Strength: 0,3 N/mm² FP: A
Bond Strength: W0 (≤ 0,5 kg/m2.dk0·5)
Water Vapor Permeability Coefficient: ≤30μ
Fire Class: A1
Temperature Resistance: -30°C ile + 60°C arası